| ECHOLINK | ||
| NODENAME | NODEID | REPEATER |
| KI4UWC-R | 465626 | 146.925 -600 PL156.7 |
| BASIC ECHOLINK INSTRUCTIONS | |
| To Connect To A Node Via Radio | To Disconnect From Node Via Radio |
|
|
| The connection / disconnect will take about 5 seconds and give you a message when completed.
!! IMPORTANT !! Please wait 1 second after your press PTT before you start speaking
or the first part of your conversation will not be heard. |
|
| SHORTCUT COMMANDS | ||
| LOCATION | NODE | SHORTCUT |
| K4SIX – Orange Park, Florida 6 Meter | 53190 | 50 |
| Orange Park Club 440 ( 444.500) | 80108 | 51 |
| CROWN DISTRICT SHORTCUTS | ||
| LOCATION | NODE | SHORTCUT |
| DUVAL EOC ( WJ4EOC Crown District ) | WJ4EOC | CD0 |
| FL EOC | KA4EOC | CD1 |
| CD2 | ||
| CLAY – 146.925 | KI4UWC-R | CD3 |
| DUVAL – 147.390 | K2LSF-R | CD4 |
| NASSAU – 146.835 | W4NAS-R | CD5 |
| PUTNAM – 145.370 | W4SA-R | CD6 |
| ST JOHNS – 146.625 | KF4MX-R | CD7 |
| FLAGLER – 145.470 (East Coast District) | KG4IDD-R | CD8 |
| RED CROSS HQ | WA4RC | CD9 |
| COMMAND DESCRIPTION | KEYS |
| Connect | EnterNode# |
| ConnectByCall | C |
| Disconnect | # |
| Disconnect ALL | ## |
| Reconnect | 09 |
| Status | 08 |
| Play Information | * |
| Query By Call | 07 |
| Query By Node | 06 |
| Random Conference | 02 |
| Random Link | 01 |
| Random Node | 00 |
| Random User | 03 |
Firewall Configuration Support can be found at http://www.echolink.org/firewall_solutions.htm
Basic Information
EchoLink requires that your router or firewall allow inbound and outbound UDP to ports 5198 and 5199, and outbound TCP to port 5200. If you are using a home-network router, you will also need to configure the router to “forward” UDP ports 5198 and 5199 to the PC on which EchoLink is running.
This can be summarized as:
Allow UDP destination ports 5198-5199 between Internet and PC in both directions
Allow TCP (source port any, destination port 5200) from PC to InternetThe information above applies to every situation, regardless of the type of equipment and software you are using. If the information below does not help you solve the problem, please consult your equipment’s documentation, or contact the manufacturer for support, and provide them with the information above.
Note: If you are using Internet security software and have recently upgraded to a newer version of EchoLink, you may need to re-apply the special security settings you had established earlier.